tarm 2.5 FB4
The tarm 2.5 FB4 QS MAX show laser projector is a pure diode, full color whitelight RGB laser system with full analog color modulation and already integrated Pangolin FB4 Quickshow 'Max' network interface.
The Pangolin FB4 is a network interface, which runs with Pangolin Quickshow or Pangolin BEYOND software. Pangolin Quickshow is already included. There is no need anymore to using ILDA cables to connect the show laser to the control computer.
The Pangolin FB4 'Max' offers the possibility to control the show laser system through TCP/IP network, DMX512 control or by the onboard SD-memory.
The tarm 2.5 FB4 is especially suitable for show laser applications in clubs and bars and can be used by beginners as well as professionals.
- network interface Pangolin FB4 Quickshow 'Max' is already integrated
- including Pangolin Quickshow software
- Full Ethernet control
- Stand-alone SD memory card
- Full color OLED display
- Support for DMX and ILDA
- various setting options on the back of the device
|Guaranteed power at aperture:||2'700 mW|
|Power red:||700 mW / 638 nm|
|Power green:||750 mW / 520 nm|
|Power blue:||1'500 mW / 450 nm|
|Beam specifications (full angle):||ca. 3.5 mm / <1.0 mrad|
|Operation modes:||network interface, DMX, ILDA|
|Scanner:||45 kpps@8° ILDA|
|Scan angle max.:||45° max. (@30 kpps)|
|Accessories:||key, power cable, manual, interlock connector|
|Power supply:||85 V - 250 V / AC|
|Power consumption:||100 W|
|Dimensions:||220 x 220 x 150 mm (L x W x H)|
Scanner upgrade for enhanced graphics display and scan speed.
Upgrade causes a decrease of up to 5% of the stated guaranteed (output) power.
|Scan speed:||60 kpps@8° ILDA|
|Scan angle:||68° max. (@35 kpps)|
|Step response time:||0.3 msec (2° opt. step)|