tarm 5 FB-4
The tarm 5 FB-4 QS MAX show laser projector is a pure diode, full color whitelight RGB laser system with full analog color modulation and already integrated Pangolin FB-4 Quickshow 'Max' network interface.
The Pangolin FB-4 is a network interface, which runs with Pangolin Quickshow or Pangolin BEYOND software. Pangolin Quickshow is already included. There is no need anymore to using ILDA cables to connect the show laser to the control computer.
The Pangolin FB-4 'Max' offers the possibility to control the show laser system through TCP/IP network, DMX512 control or by the onboard SD-memory.
The tarm 5 FB-4 is suitable for demanding show laser applications and graphics projections in clubs, bars and on small stages and can be used by beginners as well as professionals.
- network interface Pangolin FB-4 Quickshow 'Max' is already integrated
- including Pangolin Quickshow software
- Full Ethernet control
- Stand-alone SD memory card
- Full color OLED display
- Support for DMX and ILDA
- various setting options on the back of the device
|Guaranteed power at aperture:||5'000 mW|
|Power red:||1'400 mW / 638 nm|
|Power green:||1'500 mW / 520 nm|
|Power blue:||3'000 mW / 450 nm|
|Beam specifications (full angle):||ca. 3.5 mm / <1.0 mrad|
|Operation modes:||FB-4 over LAN, DMX, ILDA, SD card|
|Scanner:||45 kpps@8° ILDA|
|Scan angle max.:||50° max. (@30 kpps)|
|Accessories:||FB-4 integrated, browser interface, key, power cable, manual, interlock connector|
|Power supply:||85 V - 250 V / AC|
|Power consumption:||320 W|
|Dimensions:||320 x 260 x 140 mm (L x W x H)|
Scanner upgrade for enhanced graphics display and scan speed.
Upgrade causes a decrease of up to 5% of the stated guaranteed (output) power.
|Scan speed:||60 kpps@8° ILDA|
|Scan angle:||68° max. (@35 kpps)|
|Step response time:||0.3 msec (2° opt. step)|
tarm Gobo Wheel compact
DMX controlled gobo wheel for tarm show laser systems:
1x Gobo wheel 148mm
Grating Grid, Line, Lumia